4 mac address filtering, 4 mac, Address filtering – TP-Link TL-WA5110G User Manual
Page 53
45
page.
For example, if you want to block the PC(s) on your LAN to access websites
and websites with .net in the end on the Internet while no limit for other
websites, you should specify the following Domain filtering list:
4.10.4 MAC Address Filtering
Like the IP Address Filtering page, the MAC Address Filtering page (shown in Figure 4-41) allows
you to control access to the Internet by users on your local network based on their MAC Address.
Figure 4-41 MAC address Filtering
Before setting up MAC Filtering entries, you must ensure that Enable Firewall and Enable MAC
Filtering have been selected on the Firewall page. To Add a MAC Address filtering entry, clicking
the Add New… button. The page "Add or Modify a MAC Address Filtering entry" will appear,
shown in Figure 4-42:
Figure 4-42 Add or Modify a MAC Address Filtering entry
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example:
00-0E-AE-B0-00-0B.
2. Type the description of the PC in the Description field. Fox example: John’s PC.
3. Status - Select Enabled or Disabled for this entry on the Status pull-down list.