TP-Link TL-WA5110G - Manual (Page 69)

61
Chapter 5. Configuring the Device in AP Operation
Mode
This Chapter describes how to configure some advanced settings for your Access Point through
the web-based management page in AP operation mode.
5.1 Login
After your successful login, you can configure and manage the Access Point. There are eight
main menus on the left of the Web-based management page. Submenus will be available after
you click one of the main menus. The eight main menus are: Status, Quick Setup, Operation
Mode, Network, Wireless, DHCP, Wireless Settings
and System Tools. On the right of the
Web-based management page, there are the detailed explanations and instructions for the
corresponding page. To apply any settings you have altered on the page, please click Save.
The detailed explanations for each Web page key’s function are listed below.
5.2 Status
The Status page displays the AP's current status and configuration. All information is read-only.
Figure 5-1
¾ Wired - This field displays the current settings or information for the Network, including the
MAC address, IP address and Subnet Mask.
¾ Wireless -
This field displays basic information or status for wireless function, including