USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router - Manual (Page 111)

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
●
List VCC. Enter 1 at the VCC Menu. The List VCC Menu appears. This menu displays
defined VCC variables.
●
Add VCC. Enter 2 at the VCC Menu. The Add VCC Menu appears. This menu allows you
to add VCC variables. Enter VPI, VCI, encapsulation, and service. Afterward, the system
presents additional options. Here is an example of settings for a UBR. Other service
options present similar variables. To add VCC variables, set these interface options...
§ Vpi [0-255] § Peak Cell Rate {cells/sec}
§ Vci [0-65,535] § Average Cell Rate {cells/sec}
§ Encapsulation Type [aa15] § Burst Size {in cells}
§ Service [cbr/rtvbr/nrtvbr/ubr] § CDVT {in micro sec}
After you complete your configuration, proceed to the Basic Menu and enter 8. The Save &
Reboot Menu appears. From this menu, save your changes and reboot the router.
• Delete VCC. Enter 3 at the VCC Menu. The Delete VCC Menu appears. This menu Allows
you to delete VCC variables.
Main Menu=>Advanced=>
SNDCP
Enter 7 at the Advanced Menu. The SNDCAP Menu appears. This menu provides the following
options...
file:///P|/T_WRITER/Documentation/Released/900...9003%20(Guiness)%20prac%20template/tquicks.htm (29 of 42) [11/6/2002 8:58:14 AM]