USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router - Manual (Page 49)

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
After you click Save, the router returns to the Save and Restart screen. You may reboot
your router by clicking Restart. Another way to reboot is to turn the router off and on from
the router’s power switch.
• CAUTION. The Restart button doesn’t return you to the Save and Restart menu. You
can return by either of two methods: Click the browser’s Back Arrow key. Or reenter the
router management IP address on your browser’s address line.
Restore and Restart
The Restore and Restart option returns the router’s configuration to factory default
settings.
• CAUTION. During restoration to default settings, the router loses all your changes. After
the restoration process completes, you must reenter changes.
To erase the current router configuration…
1. Click Restore.
2. Click Restart.
3. Allow the router a few minutes to restore to factory settings.
4. Enter the router management IP address in the address line of your browser. The
router main menu appears.
file:///P|/T_WRITER/Documentation/Released/900...ide/9003%20(Guiness)%20prac%20template/wui.htm (47 of 55) [11/6/2002 8:53:38 AM]