USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router - Manual (Page 194)

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
Configures the specified WAN interface to use 1483MER (MAC Encapsulation Routing). The “mer”
command is used to enable the configuration.
Port The MER interface name (mer0).
<vpi> <vci > These are the vpi, vci values on which the 1483 is configured. vpi,vci are assigned
with the vcadd command. The showatmconn command can also be used to list the current ATM
connections with their respective vpi and vci values. (Note the vcadd and showatmconn
commands are located in the “atm” directory). The vpi value is between 0 - 255. The vci value is
between 0 - 65535.
-encapsulation llc | vc Specifies the encapsulation type. The possible values are ‘llc’ or ‘vc’ which
represent Logical Link Control or VC multiplexing respectively.
1.25.19 mer
mer enable | disable | Delete | Status
Enables, disables, deletes or gives status of the 1483MER configurations.
1.25.20 relay
relay
relay -o -client <-if interface> <-pvc vpi vci>
relay -o -server <-if interface> <-pvc vpi vci>
relay -o enable | disable
relay -o -display
Configures and enables PPPoE relay.
-client <-if interface> <-pvc vpi vci>
Specifies the server interface for the PPPoE Relay. The PPPoE server is connected to this
interface. The interface may be ppp0, ppp1, ppp2, ppp3, ppp4, ppp5, ppp6, or ppp7.
-server <-if interface> <-pvc vpi vci>
Specifies the client interface for the PPPoE Relay. The PPPoE clients are connected to this
interface. Typically eth0 is specified.
enable
file:///P|/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (70 of 71) [11/6/2002 8:58:46 AM]