USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router - Manual (Page 223)

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
•
Can route IP with network address translation (NAT) for the LAN
Setup
1. Open the SureConnect Web User Interface (WUI). This example employs the
Web User Interface. You can set up the Network Model with any of the router's three
interfaces. The other two interfaces are the Terminal User Interface (TUI) and the
Command-Line Interface (CLI). In any case, succeeding steps are similar.
2. Click ADSL Standard. The ADSL Standard Window opens.
3. Select the ADSL protocol that you’ll use. For most users, Multi Mode is the right choice.
4. Click Apply.
5. Click WAN Setup. The WAN Setup Window opens.
file:///P|/T_WRITER/Documentation/Released/900...%20(Guiness)%20prac%20template/configexamp.htm (28 of 33) [11/6/2002 9:00:35 AM]