USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router - Manual (Page 90)

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
§ PPPoA
A. Enter SNDCP option 4 for PPPoA.
B. Enter remaining information as provided by your DSL service provider.
§ MER
A. Enter SNDCP option 5 for MER.
B. Enter remaining information as provided by your DSL service provider.
6. After you complete your configuration, proceed to the Basic Menu and enter 8. The Save
& Reboot Menu appears. From this menu, save your changes and reboot the router.
Main Menu=>Basic=>
WAN Setup
(continued)
•
ATM PVC Deletion. Enter 3 at the WAN Setup Menu. The ATM PVC Deletion Menu
appears. To delete an ATM PVC…
1. Enter valid VPI and VCI values.
2. After you complete your configuration, proceed to the Basic Menu and enter 8. The Save
& Reboot Menu appears. From this menu, save your changes and reboot the router.
Main Menu=>Basic=>
LAN Setup
Enter 4 at the Basic Menu. The IP LAN Menu appears. To configure a LAN IP address…
1. Accept default values or enter new IP address and subnet mask values.
2. Use LAN Setup to set the router’s IP Address and Subnet Mask.
3. Setup the LAN IP address to connect the router to.
4. Manage the router from your Local Area Network (LAN). A LAN connects computers in
the same building or area.
5. After you complete your configuration, proceed to the Basic Menu and enter 8. The Save
& Reboot Menu appears. From this menu, save your changes and reboot the router.
file:///P|/T_WRITER/Documentation/Released/9003.../9003%20(Guiness)%20prac%20template/tquicks.htm (8 of 42) [11/6/2002 8:58:14 AM]