USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router - Manual (Page 224)

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
6. Below the Add button, notice the Current ATM PVC List. On this list, select any PVC that you
don’t need.
7. Click Delete.
8. Click RFC1483 Routed.
9. Enter VPI and VCI values.
10. Click the radio button for your desired encapsulation mode. Your choices are: LLC/SNAP and
VC Multiplexing.
11. At Network Settings, check NAPT.
12. At Network Settings, check DHCP.
13. In the RFC1483 Routed box, enter the static IP address and mask that your ISP supplied.
file:///P|/T_WRITER/Documentation/Released/900...%20(Guiness)%20prac%20template/configexamp.htm (29 of 33) [11/6/2002 9:00:35 AM]