USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router - Manual (Page 154)

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
Reads PHY register
Examples:
[root @ ethernet]$ pread eth0 1
Register 1 value 0xffff
Displays the register 1 value of eth0 interface.
1.13.5 pwrite
pwrite <interface> <port(decimal)> <value(hex)>
Writes PHY register
1.14 rarpd
This command list is used to get the IP address of diskless system.
1.14.1 add
add <0xH/Waddress > <IPAddress >
Used to add Hardware address and IP address into the DataBase.
<0xH/Waddress > Hardware address in hexadecimal format.
<IPAddress > IP address in dot notation.
Examples:
[root @ rarpd]$ add 0x112233445566 192.168.3.4
Adds the H/W address and IP Address mapping in the database.
1.14.2 delete
delete <0xH/Waddress >
Deletes an entry in the existing RARP DataBase.
file:///P|/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (30 of 71) [11/6/2002 8:58:45 AM]