USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router - Manual (Page 200)

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
When you use MAC Encapsulated Routing (MER), Ethernet frames bridge over the ATM Virtual
Circuit. The router can still perform IP routing with Network Address Translation (NAT) for the LAN. To
perform this NAT function, the router requires a static IP address for its MER interface. Your ISP must
supply the address. The router also supports dynamic assignment of IP addresses to local network
nodes. When using dynamic assignment, the router acts as a DHCP server.
Setup
1. Open the SureConnect Web User Interface (WUI). This example employs the Web User
Interface. You can set up the Network Model with any of the router's three interfaces. The other
two interfaces are the Terminal User Interface (TUI) and the Command-Line Interface (CLI). In
any case, succeeding steps are similar.
2. Click the Service Provider Settings tab. This tab is on the top of the screen. The Service
Provider Settings Window opens.
3. Click ADSL Standard. The ADSL Standard Window opens.
4. Select the ADSL protocol that you’ll use. For most users, Multi Mode is the right
choice.
5. Click Apply.
6. Click WAN Setup. The WAN Setup Window opens.
file:///P|/T_WRITER/Documentation/Released/900...%20(Guiness)%20prac%20template/configexamp.htm (5 of 33) [11/6/2002 9:00:35 AM]