Vanguard Managed Solutions Vanguard 7300 Series - Manual (Page 155)

Modifying Your Vanguard 7300 5-17
Removing and Replacing the CPU Card and CPU Mezzanine Card (PMC)
Reinstalling the CPU Card
Reinstalling the
CPU Card Use the steps in this table to reinstall the CPU card into the Vanguard 7300
enclosure:
Step Action
1 Open the ejector levers.
2 Align the CPU card with the Slot 1 card rails on the chassis.
Note
The CPU card always must be installed in Slot 1.
3 Insert the card between the slot rails and push in until you feel resistance.
4 Simultaneously press the ejector levers inward until they lock.
5 Tighten the captive screws.
6 Reconnect any CPU card cables.
7 Turn the power back on.