Vanguard Managed Solutions Vanguard 7300 Series - Manual (Page 160)

5-22 Modifying Your Vanguard 7300
Removing and Replacing Carrier Expansion Cards and Mezzanine Cards (PMCs)
Replacing the Carrier Expansion Card
Installing the
Carrier Expansion
Card When reinstalling a Carrier Expansion Card, the first Carrier Expansion card should
be placed in card slot 2, the first slot beside the CPU Card. Install subsequent Carrier
Expansion cards in subsequent slots.
Use the steps in this table to install a Carrier Expansion Card in a Vanguard 7300
enclosure:
Step Action
1 Open the ejector levers.
2 Align the Carrier Expansion Card with the card rails in the Vanguard 7300
chassis slot.
3 Carefully insert the Carrier Expansion Card in the card rails and slide the
card until you feel resistance.
4 Simultaneously press the ejector levers inward until they lock.
5 Tighten the captive screws.
6 Reconnect any connector cables.