Vanguard Managed Solutions Vanguard 7300 Series - Manual (Page 157)

Modifying Your Vanguard 7300 5-19
Removing and Replacing Carrier Expansion Cards and Mezzanine Cards (PMCs)
Removing the Carrier Expansion Card
Removing the
Carrier Expansion
Card Use the steps in this table to remove the Carrier Expansion Card from the Vanguard
7300 enclosure:
Step Action
1 Disconnect any cables attached to the connectors on the front of the Carrier
Expansion Card.
2 Begin pressing outward on the two ejector levers at the same time, then
pause to wait for the blue LED on the front of the card to illuminate.
3 Press the two ejector levers.
4 Pull the Carrier Expansion Card from the enclosure.