Vanguard Managed Solutions Vanguard 7300 Series - Manual (Page 204)

B-6
T3/E3 ATM Cables
T3/E3 ATM Cables
Introduction The T3/E3 ATM Card requires 2 BNC-to-BNC 75-Ohm coaxial cables that connect
to either a T3 or E3 network and provide 75-Ohm line impedance.
BNC Adapter Cable These BNC adapter cables provide two BNC connectors that connect to either a T3
or E3 network:
• BNC connector marked XMIT for transmit (TX)
• BNC connector marked REC for receive (RX)