About this manual, Purpose, Scope – Xantrex Technology PROsine 2.0 User Manual
Page 5: Audience, Organization
445-0089-01-01
iii
About This Manual
Purpose
The purpose of this User’s Manual is to provide explanations and procedures for
installing, operating, maintaining, and troubleshooting the PROsine 2.0 Inverter/
Charger.
Scope
The Manual provides safety guidelines, detailed planning and setup information,
procedures for installing the inverter, as well as information about operating and
troubleshooting the unit. It does not provide details about particular brands of
batteries. You need to consult individual battery manufacturers for this
information.
Audience
The Manual is intended for anyone who needs to install and operate the PROsine
2.0 Inverter/Charger. Installers should be certified technicians or electricians.
Organization
This Manual is organized into seven chapters and three appendixes:
Introduction: Chapter 1 introduces you to the PROsine, explains the inverting,
changing and power system management functions
Product Orientation: Chapter 2 will familiarize you with the following
components of a PROsine system:
Installation: Chapter 3 This section gives complete information for installing a
PROsine system.
Configuration: Chapter 4 explains how to configure the PROsine to best meet
your electrical system requirements. It is divided into three parts:
Operation: Chapter 5 begins with a system startup check that you carry out after
installation and configuration to verify that the PROsine is operating correctly.
The chapter also provides information that will guide you during routine, ongoing
operations.
Troubleshooting: Chapter 6 describes how to troubleshoot the PROsine
Series Operation: Chapter 7 provides information about installing and operating
two PROsines in series: