Xantrex Technology PROsine 2.0 - Manual (Page 73)

Part 2: Configuration Menus and Screens
445-0089-01-01 4–5
Table 4-1 Menu Structure—Overview
Configure PROsine—Basic Configure PROsine—Advanced Configure Display Panel Configure Battery Diagnostics
AC Breaker Size
Load Sensing
Equalize Load Sensing
Load Sense Power
Load Sense Interval
Low AC Transfer (V)
Low AC Transfer (Hz)
High AC Transfer (V)
High AC Transfer (Hz)
AC Series Mode
Inverter Low V Shutdown
Inverter Low V Warning
Inverter Low V Restart Hysteresis
Run Without Panel
Inverter After Reset Without Panel
Charger After Reset Without Panel
Auto Restart After Error
Reset to Defaults Audible Alarm
LCD Backlight Mode
LCD Backlight Brightness
LCD Backlight Timeout
Temperature (C/F) Battery Size
Default Battery Temp
Battery Type
View/Change Battery Details:
• Battery Temp. Coefficient
• Bulk Charge Mode Settings
• Max Voltage
• Max Current (%C)
• Threshold Voltage
• Threshold Timeout
• Absorption Mode Settings:
• Max Voltage
• Max Current (%C)
• Max Timeout
• Threshold Current (%C)
• Threshold Timeout
• Overcharge Mode Settings:
• Max Voltage
• Max Current (%C)
• Max Timeout
• Float Mode Settings:
• Max Voltage
• Max Current (%C)
• Max Timeout
• Threshold Voltage
• Threshold Timeout
• Equalize Mode Settings:
• Max Voltage
• Max Current (%C)
• Max Timeout
• Threshold Change
• Threshold Timeout
• Constant Mode Settings:
• Voltage Setpoint
• Current Setpoint
Charger Mode
Charger Type
Charger High Battery V Warning Offset
PS System Mode
View Last 20 PROsine Faults
Clear PROsine Fault Log
View Last 10 Panel Faults
AC Bad Cause
View Software Versions:
• LVP Software Revision
• HVP Software Revision
• Display Software Revision
• Display EEPROM Revision
View System Temperatures:
• Temperature at Panel
• PROsine Unit Temp. 1
• PROsine Unit Temp. 2
PROsine HVDC