Yamaha RX-Z11 - Manual (Page 11)

11
En
In
tr
od
ucti
on
Check that you received all of the following parts.
The form of the supplied accessories varies depending on the models.
■ Installing batteries in the remote control
1
Take off the battery compartment cover.
2
Insert the four supplied batteries (AAA, LR03)
according to the polarity markings
(+ and –) on the inside of the battery compartment.
3
Snap the battery compartment cover back into place.
• Change all of the batteries if you notice the operation range of the remote
control decreases.
• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as alkaline and manganese
batteries) together. Read the packaging carefully as these different types of
batteries may have the same shape and color.
• We strongly recommend that you use alkaline batteries.
• If the batteries have leaked, dispose of them immediately. Avoid touching
the leaked material or letting it come into contact with clothing, etc. Clean
the battery compartment thoroughly before installing new batteries.
• Do not throw away batteries with general house waste; dispose of them
correctly in accordance with your local regulations.
• If the remote control is without batteries for more than 2 minutes, or if
exhausted batteries remain in the remote control, the contents of the
memory may be cleared. When the memory is cleared, insert new
batteries, set up the remote control code and program any acquired
functions that may have been cleared.
Getting started
Supplied accessories
Note
AMP
TV
SOURCE
ZONE MODE
SELECT SETUP ID MACRO
4 3
SYSTEM MEMORY
VOLUME
DVD CD
V-AUX MULTI
AV TV
PHONO
CD-R
POWER STANDBY POWER POWER
DTV DVR VCR
DOCK TUNER XM
BD HD DVD
MD TAPE
CBL SAT
NET USB
REC
SRCH MODE LEVEL
BAND
MENU TITLE
CLASSICAL 1 CLASSICAL 2 LIVE/CLUB ENTERTAIN
MEMORY
PC/MCX
RETURN DISPLAY
PRESET/CH
ENTER CAT.
A-E
MUTE
2 1
NET RADIO
PRG SELECT
USB
MOVIE STEREO SUR. DECODE ENHANCER
THX STRAIGHT EXTD SUR. PURE DIRECT
PARTY SLEEP HDMI OUT AUDIO SEL
TV VOL TV CH TV 3D DSP
1 2 3 4
5 6 7 8
ENT.
MUTE AUDIO
INPUT
9 0 10
FRONT DIRECTION
Remote control Batteries (4)
(AAA, LR03)
AM loop antenna
(For conventional AM
radio tuning)
Optimizer microphone
Power cable
Indoor FM antenna
(Two for U.S.A. model)
POWER STANDBY
INPUT
SYSTEM MEMORY
4 1 3 2
INT SOURCE VOLUME
MUTE
PRESET
Simplified remote control Microphone base
AM loop antenna
(For HD Radio tuning)
(U.S.A. model only)
(U.S.A. and Canada
models)
1
3
2
Notes