Yamaha RX-Z11 - Manual (Page 96)

Graphical user interface (GUI) menu
96
En
Use this feature to reassign digital input/outputs, select the input
signal, rename the inputs, or adjust the level of the signal input at
each input source.
• Some parameters described above may not be available for all input
sources and some parameters are only available for specific input sources.
• You can set “Volume Trim” for each sub input source separately.
• The “Play Style” setting is effective to both “PC/MCX” and “USB”.
■ Station Search (U.S.A. model only)
Use this feature to select the preset HD Radio stations by the name
of the stations. See page 72 for details.
■ I/O Assignment
(Input/output assignment)
Use this feature to assign the input/output jacks according to the
component to be used if the initial settings of this unit do not
correspond to your needs. Change the following parameters to
reassign the respective jacks and effectively connect more
components.
Once the input/output jacks are reassigned, you can select the
corresponding component by using the DINPUT selector (or the
input selector buttons(3)).
Example 1: Assigning the CD DIGITAL INPUT COAXIAL
jack to “VCR”.
1
Select “Input Select” in the GUI menu and then select
“VCR”.
2
Select “I/O Assignment” and then “Coaxial Input”.
3
Select “5CD”.
Example 2: Clearing a jack assignment.
1
Select “Input Select” and then select the desired
input source (“DVD”, etc.).
2
Select “I/O Assignment” and then select the desired
jack assignment (“Coaxial Input”, “Optical Input”,
“Optical Output”, “Analog I/O” “Component Video”,
or “HDMI”).
3
Select “None” and then press 9
ENTER to clear the
assignment.
• “None” appears in the GUI when any input source is not assigned to the
input/output jack.
• You cannot select a specific item more than once for the same type of jack.
• When you connect a component to both the COAXIAL and OPTICAL
jacks, priority is given to signals input at the COAXIAL jack.
Input Select
Input source
Sub input
source
Parameter
XM
(U.S.A. and
Canada models
only)
—
Volume Trim
Rename
TUNER HD Radio (U.S.A.
model only) Station Search
(U.S.A. model only)
Volume Trim
Rename
TUNER (U.S.A.
model only) Volume Trim
Rename
MULTI CH
—
Volume Trim
Rename
Multi CH Assign
BGV
PHONO
CD
CD-R
MD/TAPE
BD/HD DVD
DVD
DTV
CBL/SAT
DVR
VCR
—
I/O Assignment
Audio Select
Decoder Mode
Volume Trim
Rename
V-AUX
—
I/O Assignment
Audio Select
Decoder Mode
Volume Trim
Rename
DOCK
—
Volume Trim
Rename
NET/USB PC/MCX Volume Trim
Play Style
NET RADIO Volume Trim
USB USB Select
Volume Trim
Play Style
Notes
Notes
I/O Assignment
Audio Select
Decoder Mode
Coaxial Input
Optical Input
Optical Output