Yamaha RX-Z11 - Manual (Page 73)

Using HD Radio™ features (U.S.A. model only)
73
En
In
tern
al
So
ur
ce
Op
eratio
n
Use this feature to select one of the 8 HD Radio audio programs
(HD1 to HD8) when the unit is in the tuner mode. Each audio
program contains data programs.
Press A
PRG SELECT b / a on the remote control
repeatedly to toggle between HD Radio audio programs.
The HD indicator may disappear from the front panel display while
toggling between data programs.
• Only 1 HD Radio audio program (HD1) is available for AM broadcasts,
while up to 8 audio programs (HD1 to HD8) are available for FM
broadcasts.
• When reception for an audio program ceases, the HD indicator disappears
from the front panel display and HD1 is automatically selected after
approximately 20 seconds.
• Some audio programs may not contain data programs depending on the
broadcasting station and the time period.
• The audio programs from HD2 to HD8 can be selected only when they
contain data programs.
There are 3 types of front panel displays that show HD Radio
information when the unit is in the tuner mode: frequency, station
and music information.
■ Front panel display
Press K
DISPLAY on the remote control repeatedly to
turn on and off the HD Radio information display.
(Upper line: Station name / FM or AM / Audio program)
Station information is available when a station name is received as
data in 4 alphabetical codes.
(Lower line: Song title / Artist name / Program types /
Comment)
Music information is available only when data programs are
received.
If the music information is long, it automatically scrolls to the left in
the front panel display.
y
You can set the front panel display mode by using the “Scroll” parameter in
“Front Panel Disp.” (see page 112).
■ Video monitor
Press K
DISPLAY on the remote control.
The following information is displayed in the video monitor.
y
• To turn off the displayed information screen, press KDISPLAY again.
• You can set the time for which the HD Radio information is displayed in
the video monitor by using the “On Screen” parameter in “Manual Setup”
(see page 108).
• You can display the HD Radio information in the Zone video monitor (see
page 141).
• The current HD Radio reception level appears on the top of the HD Radio
information screen. For the best reception, adjust the orientation of the
antenna so that “
” or “ ” is displayed here.
Before performing the following operations, set the operation mode
selector on the remote control to FSOURCE and then press
3TUNER.
Selecting HD Radio™ audio programs
Notes
Displaying HD Radio™ information
W X Y Z - F M : H D 1
F r a n k i e Z i p p e r
HD Radio Information
Station A FM 100.1MHz
Name WXYZ-FM
Program HD1 HD2 HD3 HD4 HD5 HD6 HD7 HD8
Program type Pops
Road to India
Frankie Zipper
70’s great performance of Frankie Zipper
Hold: ENTER
STEREO AUTO
HD
HD Radio Reception level