Yamaha RX-Z11 - Manual (Page 75)

XM™ Satellite Radio tuning (U.S.A. and Canada models only)
75
En
In
tern
al
So
ur
ce
Op
eratio
n
1
Rotate the D
INPUT selector (or press 3XM) to
select “XM” as the input source.
The cursor on the left of the XM indicator lights up in the front
panel display and the XM Satellite Radio information (such as
channel number, channel name, category, artist name, or song
title) for the currently selected channel appears in the front
panel display.
y
When you select “XM” as the input source, this unit automatically
recalls the previously selected channel.
The XM Satellite Radio signals cannot be output at the AUDIO OUT
(REC) jacks.
2
Search for a channel by using one of the XM Satellite
Radio search modes.
• To select a channel from the all channel list, see “All
Channel Search mode”.
• To select a channel by category, see “Category Search
mode”.
• To select a channel from the preset channels, see “Preset
Search mode”.
• To select the desired channel directly by entering the channel
number, see “Direct Number Access mode” on page 76.
y
• You can use the Neural-THX Surround decoder to enjoy the XM HD
surround sound content of the XM Satellite Radio broadcasts in
multi-channels (see page 86).
• You can set the XM Satellite Radio preset channels (see page 76).
• You can display the XM Satellite Radio information in the front
panel display or video monitor (see page 77).
■ All Channel Search mode
1
Press L
SEARCH MODE (or ISRCH MODE)
repeatedly to select “ALL CH SEARCH”.
y
You can change the channel category by pressing MPROGRAM (or
9CAT.
l / h) repeatedly.
2
Rotate M
PROGRAM (or 9PRESET/CH k / n)
repeatedly to search for a channel within all
channels.
y
You can search for a channel quickly by pressing and holding
9PRESET/CH k / n.
■ Category Search mode
1
Press L
SEARCH MODE (or ISRCH MODE)
repeatedly to select “CAT SEARCH”.
2
Press M
PROGRAM (or 9CAT. l / h) repeatedly to
change the channel category.
3
Rotate M
PROGRAM (or 9PRESET/CH k / n)
repeatedly to search for a channel within the selected
channel category.
y
You can search for a channel quickly by pressing and holding
9PRESET/CH k / n.
■ Preset Search mode
Prior to selecting a preset channel in the Preset Search mode, you
must preset XM Satellite Radio channels. For details, see “Setting
the XM™ Satellite Radio preset channels” on page 76.
y
The initial factory setting of all preset channels (A1 to E8) is “[001]
Preview”.
1
Press L
SEARCH MODE (or ISRCH MODE)
repeatedly to select “PRESET SEARCH”.
2
Press M
PROGRAM (or 9CAT. l / h) repeatedly to
change the preset channel group (A to E).
3
Rotate M
PROGRAM (or 9PRESET/CH k / n)
repeatedly to change the preset channel number (1 to
8).
y
You can also select the preset channel number directly by pressing the
numeric buttons (1 to 8) on the remote control.
Before performing the following operations, set the operation mode
selector on the remote control to FSOURCE.
Basic XM™ Satellite Radio operations
Note
TUNER XM MULTI CH PHONO CD CD-R DVD DTV DVR VCR MD
TAPE
BD
HD DVD
CBL
SAT
V-AUX
DOCK
NET
USB
[ 0 0 1 ] P r e v i e w
Lights up
(U.S.A. and Canada models)
A L L C H S E A R C H
C A T S E A R C H
P R E S E T S E A R C H