Yamaha RX-Z11 - Manual (Page 134)

Using multi-zone configuration
134
En
This unit can control the audio and video system in the main zone and up to 3 optional zone (Zone 2, Zone 3, and Zone 4), and you can use
the internal amplifiers or external amplifiers in Zone 2, Zone 3, or Zone 4.
The multi-zone system configuration differs depending on your requirements and equipment. Before connecting the speakers and/or external
amplifiers for the multi-zone configuration, plan the total design of your multi-zone system.
When you plan the system, consider the following points:
1. Do you want to use the internal amplifiers of this unit or external amplifiers?
2. How many zones do you want to use this unit for?
3. How many channels do you want to use in the main zone?
4. If you use the internal amplifiers for the other zones, you cannot use some channels in the main zone in some cases.
5. How many speakers do you have?
6. Do you want to use the visual sources other than the main zone?
y
Since there are many possible ways to connect and use this unit in a multi-zone configuration, we recommend that you consult with your nearest authorized
Yamaha dealer or service center for the planning and setup of the multi-zone system that best meet your requirements.
In the following instruction, following system configuration is the example. When you use this system configuration, you can enjoy 7.2-
channel playback in the main zone and 2-channel playback in the optional two zones. You can also enjoy 5.2-channel playback in the main
zone and 2-channel playback in the optional three zones.
Step1: Planning the multi-zone system
Pre-amplifier mode
If you want use the external amplifiers for the all channels in the main zone, you can use all the speaker terminals of this unit for Zone 2,
Zone 3, and/or Zone 4 (Pre-amplifier mode). Set “PREAMP MODE” to “ON” in the advanced setup (see page 142).
MASTER MAIN ZONE
INPUT
ON OFF
MIC OPTIMIZER
AUDIO SELECT SPEAKERS A B
YPAO SILENT CINEMA
PHONES
ON/OFF PURE DIRECT
VOLUME
MULTI ZONE
STRAIGHT TUNING MODE
ZONE ON/OFF
MENU
TONE CONTROL ZONE CONTROLS REC OUT/
ZONE 2
MEMORY FM/AM EDIT PRESET/TUNING EFFECT DISPLAY MAN'L/AUTO CATEGORY SEARCH MODE
PUSH ENTER
PROGRAM
R L OPTICAL
HDMI IN USB
AUDIO
VIDEO AUX
S VIDEO VIDEO ZONE 3 ZONE 4 ZONE 2
Zone 2
Zone 3
Zone 4
Main zone
This unit
Speakers you can use simultaneously
Speakers you can use alternately. If you turn on
Zone 4, the surround back speakers in the main
zone do not output sounds.