Yamaha RX-Z11 - Manual (Page 133)

Using multi-zone configuration
133
En
Ad
v
a
nce
d
Op
eratio
n
This unit allows you to configure a multi-zone audio/video system. The multi-zone configuration feature enables you to set this unit to
reproduce separate input sources in the main zone, second zone (Zone 2), third zone (Zone 3), and forth zone (Zone 4). You can control this
unit from the second, third, or forth zone using the supplied remote control.
Using multi-zone configuration
Step 1: Planning the multi-zone system
First, plan the total multi-zone system with this unit carefully.
☞ P. 134
Step 2: Connecting the speakers and/or external amplifiers
Wire cables between rooms and connect the component and speakers to this unit.
☞ P. 135
Step 3: Set the zone parameters
Once you have finished the connections, turn on this unit and then set the parameters in “Multi
Zone” menu (see page 109).
– Use “Zone SP Assign” to designate the speaker terminals of this unit to each zone.
☞ P. 139
– Use “Zone2 Set”, “Zone3 Set”, or “Zone4 Set” parameters to set the volume settings and
other functions in each zone.
☞ P. 109