Xerox DC - Manual (Page 115)

Xerox Document Centre Reference Guide Page 6 - 7
6.
N
etwor
k
Sc
an
ning
(Op
tio
na
l
Fe
at
ur
e)
6.
N
etwor
k
Sc
an
ning
(Opt
ional
F
eature)
Network Scanning Tab
This tab contains the following selections:
l Template Name
l Template Details
l Destination
l Update Template List
l Document Management Fields
Template Name
The Template Name list contains the factory default template that is
supplied with the Document Centre. The default template appears at
the top of the list and is selected automatically. All other templates
follow in alpha-numeric order. There is a maximum limit of up to
250 templates.
There are two types of templates:
l Template names starting with the @ symbol are templates that
currently reside at the machine. These templates have been
created using Internet Services.
l Templates without the @ symbol are templates that have been
created using CentreWare™ Network Scanning Software.
The Template Details section on the right hand side of the screen
displays information about the selected template. Each time you
select another template file, this area will update to display
information associated with the selected template.
Any changes made to the template at the machine are temporary.
Permanent changes must be made with the same utility that created
the template.