Xerox DC - Manual (Page 301)

Xerox Document Centre Reference Guide Page 13 - 13
13.
Pap
er
&
Stock
Loading Types of Common Stock
Use the Table 5 to identify the common uses and special
requirements for the variety of stock types that the Document Centre
machine can accommodate
.
Table 5: Loading Special Stock
Stock Type Common Uses Recommendation
Hole-punched Ringed binders l Use long-edge feed paper for best copy
speed.
l Load with holes on the left in Trays 5-6.
Load with holes on the right in Trays 1-4.
Perforated Pages for partial
removal, such as
order forms and
receipts l Where possible, load with the perforation
parallel to the feed direction.
Pre-printed and
letterhead Common
correspondence,
mailings and
advertising
materials l Use ultra-violet cured or oxidative inks to
extend the life of the Feed Roll Cartridges.
l Load face up in Trays 1 - 4.
Load face down in Trays 5 - 6.
Reinforced
Mylar edge Ring binders l Load reinforced edge on right Trays 1 - 4.
Load reinforced edge on left Trays 5 - 6.
l Use Long Edge Feed only.
Card stock Covers, signs l Feed from the Bypass Tray for the best
results.
l For best results set Heavy Weight attribute
from Trays 1-4.