Xerox DC - Manual (Page 317)

Xerox Document Centre Reference Guide Page 14 - 11
14.
Ma
chi
n
e
Maint
enance
Cleaning the Machine
CAUTION To avoid damage to the machine, do not pour or spray water or
cleaner directly into the Document Centre. Do not use any abrasive
cleaners to clean the Document Centre. Do not force cloth or towels
into confined areas or force parts open.
Document Glass
Maintaining Optimum Performance
The Document Centre scanner is one of the most sensitive in the
industry and one of the reasons you can produce copies with
unparalleled image quality. In order to maintain this level of image
quality the Document Glass must be cleaned.
Document Feeder Scan Area
Spots and specks in the Document Feeder Scan Area can show-up
as streaks on copies made when the Document Feeder is used.
Main Document Glass
Specks and dirt can also cause image detection problems when using
the main glass. The scanner may interpret contamination as part of
the image during a pre-scan and produce faulty copies.
Recommended Cleaning materials:
l Soft, lint-free cleaning towels.
l Xerox Platen Glass Lens and Mirror Cleaner, part number
8R3669.
Apply a non-abrasive cleaner to a towel rather than to the glass
surface. Wipe both areas of the glass, ensuring that it is free of dirt
and smudges. Wipe away any residue from the cleaner.
Document Feeder Scan Area Ensure
at least 1 inch immediately to right of
the black plastic ramp is cleaned. Main Area,
Clean entire
area.