Symbology, Electrical safety, Symbology -2 – Xerox DC User Manual
Page 24: Electrical safety -2
Page 1 - 2
Xerox Document Centre Reference Guide
Symbology
This symbol on the machine indicates a heated surface.
Electrical Safety
CAUTION
Ensure that the power connection for your machine satisfies these
requirements.
1. The power receptacle for the machine must meet the
requirements stated on the data plate on the rear of the machine.
2. The socket outlet shall be installed near the equipment and shall
be easily accessible.
3. Use the power cable that is supplied with your Document Centre.
Do not use an extension cord or remove or modify the power
cord plug.
4. Plug the power cable directly into a correctly grounded electrical
outlet. If you are not sure, consult an electrician.
Document Centre Model
Power Requirements
490 Model DC or ST
208V Outlet
Dedicated 20A circuit
480/470/460 DC or ST
115V Outlet
Dedicated 20A circuit