Xerox DC - Manual (Page 249)

Xerox Document Centre Reference Guide Page 11 - 23
1
1. T
racki
n
g Us
age
Setting Up Network Accounting
Use the following steps to setup the network accounting option:
1. Arrange for a software and hardware upgrade.
Contact Xerox to arrange for a Document Centre hardware and
software upgrade as well as delivery of network accounting
software.
2. Install the Upgrade on the Document Centre.
A Xerox representative will install or upgrade the Document
Centre hardware and software.
3. Ensure the Document Centre has TCP/IP and HTTP protocols
enabled.
Your computer network administrator has to enable TCP/IP and
HTTP protocols otherwise Network Accounting will not work
on your machine.
Go to Tools and press the Connectivity and Network Setup
button on the first Tools Screen. There will be a delay as the
network information is gathered. Press the Network Setup
button. Press the TCP/IP options button and a screen such as the
one shown below should appear.
Press the TCP/IP Settings button. This will display a new screen.
On the new screen, enable HTTP protocol by pressing the HTTP
button.
Press Exit Tools.
Tools Screen 1
Access and
Authentication
How to get here
Authentication
Network
Access and
Accounting
Accounting
Mode
Mode
Accounting