Xerox DC - Manual (Page 81)

Xerox Document Centre Reference Guide Page 4 - 29
4.
Ma
k
ing
C
opi
es
Booklet Creation
Use this feature to create multipage booklets from a sequential set of
either 1-sided or 2-sided originals. The machine will reduce and
correctly position each image to fit on the desired page so that when
the page is folded a booklet will be created.
The Machine Administrator can enable an option that produces
booklets that read either left to right or right to left.
NOTE You must input your originals LEF and use output paper that has
SEF orientation.
Refer to the illustration below to see how to make a booklet.
Fold the output sheet. Ensure that the Paper Tray Load the originals in the
Step 1 Step 2 Step 3
Document Feeder has Short Edge Feed (SEF) Stock.
2
3
4
1
2
3
4
1
or
1
3
2
(Outside back page)
(Inside front page)
Orientation of
4
1
3
2
(Outside back page)
(Inside front page)
4
Ordered originals
or
Long Edge Feed (LEF).
11 x 17 in., 8.5 x 11 in., or 8.5 x
14 in. SEF stock