Xerox DC - Manual (Page 254)

Page 12 - 2 Xerox Document Centre Reference Guide
Copy Job Default Settings
This section contains a list of all default settings. Please note: Changing default settings will
affect every subsequent job.
Table 1: Basic Copying Tab Defaults
Feature Area Options Factory
Default Explanation and Notes
Output l Top Tray Collated
l Main Tray
Collated
l Staple (optional)
l More
Collated Selects whether or not
the output is produced
in sequential collated
sets or in separate
stacks of each original.
2-sided copy l 1 to 1
l 1 to 2
l 2 to 2
l 2 to 1
l 1 to 2 Rotate Side 2
l 2 to 2 Rotate Side 2
1 to 1 sided Selects the number of
sides to be copied.
Reduce/Enlarge l 100%
l Auto
l 17 to 11 inch(64%)
l 14 to 11 inch(78%)
l Normal
l Custom
l Six presets: 25%,
64%, 78%, 129%,
154%, 200%
100% Selects the amount of
reduction/enlargement
for a document being
scanned.
Paper
Supply l Auto Paper
l Specific tray
Tray 6, if
installed,
otherwise
Tray 1 Allows the machine to
determine automatically
where to draw the
correct paper stock.