Paper trays (trays 1 - 4), Setting up paper trays, Paper trays (trays 1 - 4) -5 – Xerox DC User Manual
Page 43: Setting up paper trays -5, Pr oduct o ver vi ew paper trays (trays 1 - 4)
Xerox Document Centre Reference Guide
Page 3 - 5
3
. Pr
oduct O
ver
vi
ew
Paper Trays (Trays 1 - 4)
The Paper Trays hold up to 500 sheets of 20 lb. stock each. You can
adjust the trays to hold many sizes of paper, up to 11 x 17 inches. A
service representative can permanently adjust a tray to handle 12 x
18 inch paper. To permanently dedicate a tray to handle this size
paper, contact the Xerox Welcome Center.
Refer to Chapter 13, Paper and Stock for a listing of acceptable
stock and paper sizes, orientations, and weights.
NOTE
To achieve the maximum printing speed, paper should be loaded
LEF in the paper trays whenever possible.
Setting Up Paper Trays
The Document Centre uses a system of programmable settings to
manage the Paper Trays and the stock. These settings are established
by the Machine Administrator and determine whether a user can
change the programmed stock attributes.
There are four stock attributes: size, orientation, type, and color.
Correctly setting the Edge Guides in the paper trays allows the
machine to sense the stock size and orientation automatically.
Paper Trays 1 - 4