Output options, Output options -34, Thin stapled sets -34 – Xerox DC User Manual
Page 196
Page 10 - 34
Xerox Document Centre Reference Guide
Output Options
Thin Stapled Sets
This option and one or more of its options may or may not appear
depending on your hardware configuration. Stapling thin sets (sets
between 5 and 20 sheets of paper) poses a special challenge because
of the rise in paper caused by the added thickness of the staple.
This button allows you to change the following:
l
The number of sheets the machine will consider as a thin
stapled set.
l
The number of thin stapled sets that will be produced before the
machine will automatically pause.
l
What the machine will do after it pauses. It will either
automatically resume or remain paused.
Tools Screen 1
System Setting
More
How to get here
System Setting
(On an ST model)
(On a DC model)
Tools Screen 1
System Settings 1
More
System Setting
System Settings 2
More
System Settings 3
Output Options
System Settings 2
Output Options
Thickness caused by staples