C)input trim, D)input rename, Input trim (input trim) – Yamaha Digital Sound Projector YSP-1000 User Manual
Page 80: Input rename (input rename)
78
MANUAL SETUP
■ INPUT TRIM (Input trim)
Use to adjust the input level of the input source.
• Select TV ANALOG to adjust the level of audio and
video signals input at the TV/STB analog audio input
jacks of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select TV OPTICAL to adjust the level of audio and
video signals input at the TV OPTICAL IN jack of this
unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select VCR ANALOG to adjust the level of audio and
video signals input at the VCR analog audio input
jacks of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select AUX OPTICAL to adjust the level of audio and
video signals input at the AUX OPTICAL IN jack of
this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select DVD COAXIAL to adjust the level of audio and
video signals input at the COAXIAL IN jack of this
unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
■ INPUT RENAME (Input rename)
Use to change the name of the input source in the OSD
and the front panel display. Press an input selector button
(TV, STB, DVD, VCR, or AUX) to select the component
you want to change the name for and then perform the
following procedure.
1
Press TEST on the remote control.
2
Press / to place the _ (underbar) under
the space or the character you want to edit.
The _ (underbar) flashes.
3
Press
/
to select the desired character.
• You can use up to 8 characters for each input.
• Press
to change the character in the following
order or press
to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, #, *,
+, etc.
4
Repeat steps 1 to 3 to rename each input.
5
Press ENTER to exit.
The new names are registered, and the display returns
to the previous screen.
(
. TV ANALOG;;;;;-3.0dB
(
.
OPTICAL
;;;;-3.0dB
(
.
VCR ANALOG
;;;;;-3.0dB
(
.
AUX OPTICAL
;;;;-3.0dB
(
.
DVD COAXIAL
;;;;-3.0dB
C)INPUT TRIM
[ ]/[ ]:Up/Down[ ]/[ ]:Sel
[ENTER]:Return
p
p
p
p
AUX -> AUX
[ ]/[ ]:Position
[ ]/[ ]:Character
[ENTER]:Return
D)INPUT RENAME
p
p
p
p
TEST
ENTER
ENTER
ENTER