Xerox DocuColor 2045 - Manual (Page 103)

T O O L S M O D E
D O C U C O L O R 2 0 6 0 / 2 0 4 5 S Y S T E M A D M I N I S T R A T I O N G U I D E
T
O
OL
S
M
OD
E
1–81
Output
The Output feature allows you to set the default settings that display on the
Output option on the Basic Features screen. You may select Auto, Face Up, Face
Down, Collated, or Uncollated. Selecting Auto enables the digital press to
determine the copy output based on the scan of the original document. If Auto is
selected, the output from both DADF and the Platen Glass will be Face Up. If you
have a High Capacity Stacker or a High Capacity Stacker Stapler connected to
your digital press, you can select which output tray to send your prints to, and
whether or not to separate your printed sets. You may choose these options
independently.
This section provides instructions for using the Output feature without a finishing
device, with a high capacity stacker, and with a high capacity stacker stapler.
Without a Finishing Device
1
Touch the Output button on the Feature Defaults 1 screen. The Output screen
appears.
Figure 66. Output screen
2
Touch the Auto, Face Up, or Face Down button.
3
Touch the Collate or Uncollate button.
4
Touch the Close button to return to the Feature Defaults 1 screen.