Xerox DocuColor 2045 - Manual (Page 57)

T O O L S M O D E
D O C U C O L O R 2 0 6 0 / 2 0 4 5 S Y S T E M A D M I N I S T R A T I O N G U I D E
T
O
OL
S
M
OD
E
1–35
Audio Tones
There are three types of audio tones that can be activated on the digital press
with scanner, as shown in the following table.
Each of these tones can be deactivated or set to Soft, Normal, or Loud. The
factory default setting is Normal.
1
Touch the Audio Tones button on the Machine Defaults 1 screen. The Audio
Tones screen appears.
Figure 29. Audio Tones screen
Tone What the Tone Indicates
Attention Tone An unselectable button has been touched.
Button Selection
Tone A selectable button has been touched.
Fault Tone The press is in a fault condition and cannot continue
printing.