Xerox DocuColor 2045 - Manual (Page 49)

T O O L S M O D E
D O C U C O L O R 2 0 6 0 / 2 0 4 5 S Y S T E M A D M I N I S T R A T I O N G U I D E
T
O
OL
S
M
OD
E
1–27
Tools Off
Use the Tools Off feature to have the digital press with scanner automatically
return to the printing or scanning mode when no action has been taken on the
Tools Mode screens after the set amount of time.
KEY POINT: Jobs sent over a network will queue but will not print while the
Tools Mode is active.
1
Touch the Tools Off button on the System Timers screen. The Tools Off screen
appears.
Figure 21. Tools Off screen
2
Use the up or down arrow buttons to change the time. The range available is 10
to 60 minutes.
To use the system default time of 10 minutes, touch the System Default button.
3
Touch the Enter button on the screen to enter the new time into the system.
4
Touch the Close button to return to the Machine Defaults 1 screen, or select
another timer to change.