Xerox DocuColor 2045 - Manual (Page 56)

T O O L S M O D E
D O C U C O L O R 2 0 6 0 / 2 0 4 5 S Y S T E M A D M I N I S T R A T I O N G U I D E 1 – 3 4
Job Program Incomplete
The Job Program Incomplete feature allows users to set the time that it takes the
digital press to return to the default feature settings after features buttons have
been selected to program a job, but the job has not been started and no user
activity has occurred for the amount of time selected.
1
Touch the Job Program Incomplete button on the System Timers screen. The
Job Program Incomplete screen appears.
Figure 28. Job Program Incomplete screen
2
Use the up or down arrow buttons to change the time. The range available is 1 to
10 minutes.
To use the system default time of 2 minutes, touch the System Default button.
3
Touch the Enter button on the screen to enter the new time into the system.
4
Touch the Close button to return to the Machine Defaults 1 screen.