Xerox DocuColor 2045 - Manual (Page 69)

T O O L S M O D E
D O C U C O L O R 2 0 6 0 / 2 0 4 5 S Y S T E M A D M I N I S T R A T I O N G U I D E
T
O
OL
S
M
OD
E
1–47
Oversize Settings
You can use Trays 1 and 2 to run 12 x 18 inch or SRA3 (12.6 x 17.7 inch, 320 x 450
mm) paper by having your Xerox representative remove the side paper guide on
the paper tray, then selecting the tray and the paper size on this screen.
1
Touch the Oversize Settings button on the Machine Defaults 1 screen. The
Oversize Settings screen appears.
Figure 37. Oversize Settings screen
2
Touch the Tray 1 or Tray 2 button on the Oversize Settings screen.
3
Touch the button for the oversize paper you want to run in the tray.
4
Touch the Close button to return to the Machine Defaults 1 screen.
5
To use these settings, exit the Tools Mode and run the job from the tray
programmed.