Zenith DTV1080 - Manual (Page 14)

13
206-3675
2-3. Normal and Wide Format Signals
WHEN YOU SET THE DISAPLY SWITCH TO HDTV (1080I/720P)
Normal
Choose when you want to view a picture
with an original 4:3 aspect ratio on your
16:9 TV. Black bars will show at the left and
right sides.
Wide
Choose when you want evenly stretch the
width of a normal picture to fill a wide
screen to fill the entire screen. You may
find this setting useful for viewing 4:3 for-
matted DVD pictures.
Panorama
Choose when you want stretch the edges of
a normal picture to fill a wide screen.
Zoom1
Choose when you want to fill the entire
screen with the picture. The image will be
altered both horizontally (stretched) and
vertically (cropped). The top and bottom
portions of the picture will not be shown.
Zoom1 shows you the picture with a trade-
off between distortion and screen coverage.
Zoom2
Choose when you want to view the picture
without distortion. Some of the top and bot-
tom portions of the picture will be deleted.
Normal Picture (4:3)
Wide Picture (16:9) Output Format (16:9)
No Adjustment Required
Adjustment
Required
antenna