Zenith DTV1080 - Manual (Page 88)

87
206-3675
8-16. Setting Locks
Block Channel
Blocks any channels that you do not want to view or that you do not want your kids to watch. If you
tune in a blocked channel, a black screen with a pop-up screen will appear. You will have to enter the
correct password to view the channel. Once you turn off your HD satellite receiver, Block Channel will
automatically be reactivated.
To block channels:
1. Press the Menu button on the Remote Control to display the on-screen menu.
2. Scroll down by using “ DE ” on the thumbstick on the remote control.
3. Select the Lock menu by pressing “ ” on the thumbstick.
4. Scroll down to Block Channel by using “ DE ” on the thumbstick.
5. Press “ G ” on the thumbstick to display the Block Channel screen.
6. Use “ DEF G ” to move the highlight in the channel editing screen.
7. Toggle Blocked or Unblocked by using “ ” on the thumbstick.
The screen shown at the top left will indicate if the highlighted channel is blocked or unblocked.
8. Press “ F ” to return to the previous screen or press the Exit button on the remote control to return to
TV viewing.
NOTE
When you tune to the blocked channel,
the password is required for access.