Zenith DTV1080 - Manual (Page 27)

3. SETUP AND CONNECTIONS
26
206-3675
3-4. Connecting to Antennas - Oval Dish (Satellite A, B, C)
Receiving Signals
1. Connect the “Antenna” to the “ANT IN” jack on the HD Satellite Receiver using a coaxial RF cable.
2. Connect the cable TV signal to the "CABLE IN" jack on the HD Satellite Receiver using a coaxial RF cable.
3. Connect the “Jack 1” of the multi-switch to the “SATELLITE IN” jack on the HD Satellite Receiver using a coaxi-
al RF cable. (For proper dish installation, refer to the “Installer’s Guide” provided with your satellite dish antenna.)
4. Connect the “Phone Wall Jack” to “PHONE JACK” on the HD Satellite Receiver using a phone cable.
18V
4
3
2
1
Sat A ln
13V
LNB
Sat B LNB
Sat C LNB
Sat A
Dish
18V 13V
Sat B ln
Phone wall jack
Cable TV
wall jack
Multi switch
DISPLAY
FORMAT
A/V
OUT2
A/V
CALIB/EZ-LINK
OUT1
Antenna
PB
PR
NOTE
While you are subscribing to a DIRECTV

program-
ming package, you can still view over-the-air and
cable TV programs, if you make connections to the
over-the-air and/or cable jacks.