Zenith DTV1080 - Manual (Page 68)

67
206-3675
8-7. Managing Channels
Manual Ch. Add
Manually adds a channel to your channel list without rescanning all the channels again. EZ
Channel Scan may not pick up every channel that is available on Air and Cable. Therefore, it
may be necessary for you to add channels manually using this feature. You must enter the RF
channel number to add the desired channel to the channel map.
To add the channels missed in your channel list:
1. Press the Menu button on the Remote Control to display the on-screen menu.
2. Scroll down by using “ DE ” on the thumbstick on the remote control.
3. Select the Setup menu by pressing “ ” on the thumbstick.
4. Scroll down to Manual Channel Add by using “ DE ” on the thumbstick.
5. Move the highlight to the right with “ G ” on the thumbstick in the channel add box.
6. Enter the channel number desired by using the digit buttons on the remote control.
7. Press “ ” and the pop-up box of a result will be displayed.
8. Press the Exit button on the remote control to return to TV viewing.