Zenith DTV1080 - Manual (Page 74)

73
206-3675
8-10. Setting the Audio
Setting Digital Output
If you are using an external audio system that supports Dolby Digital, select Dolby Digital
audio mode. If you are using an external audio system that has a PCM only decoder, select
PCM (Digital). If you are not using an external audio system, select OFF.
An external Digital Output other than Dolby Digital and PCM may create a high noise
and cause damage.
To set the digital audio mode:
1. Press the Menu button on the Remote Control to display the on-screen menu.
2. Scroll down by using “ DE ” on the thumbstick on the remote control.
3. Select the Audio menu by pressing “ ” on the thumbstick.
4. Digital Output will be automatically highlighted.
5. Move the highlight to the right with “ G ” on the thumbstick .
6. Select one of the three options and press “ ” to return to the previous level.
7. Press the Exit button on the remote control to return to TV viewing.