Zenith DTV1080 - Manual (Page 87)

86
206-3675
8-16. Setting Locks
Lock System
Lets you set up specific channels, ratings and spending limits through blocking schemes.
Activates or disables all of the lock schemes previously set up. A password is required to
gain access to this menu if the lock system is activated. You can change the password by
inputting a new password twice.
To activate or deactivate the Lock System:
1. Press the Menu button on the Remote Control to display the on-screen menu.
2. Scroll down by using “ DE ” on the thumbstick on the remote control.
3. Select the Lock menu by pressing “ ” on the thumbstick.
4. If unlocked, Lock System will be automatically highlighted, otherwise requires a password.
5. Press “ F ” to return to the previous screen or
press the Exit button on the remote control to return to TV viewing.
To lock the system :
1. Move the highlight to the right with “ G ” on the thumbstick in Lock On/Off box.
2. Switch On or Off by using “ G ” Whenever you switch the lock system on or off,
you need to enter the password as a reminder.
To set the password:
1. Move the highlight to the right to Set Password with “ G ” on the thumbstick.
2. Enter the password by using the digit buttons on the remote control.
3. Enter the password again to verify the number.
NOTE
Once you enter the password on the
blocked channel, it will be effective
until the HD satellite receiver is off.
8. CUSTOMIZATION