Zenith DTV1080 - Manual (Page 72)

71
206-3675
8-9. Setting the Clock
Clock (Auto)
Enables adjustment of the time zone and activation of daylight savings time. Normally, your
clock is set using signals transmitted by DIRECTV.
To set auto clock:
1. Press the Menu button on the Remote Control to display the on-screen menu.
2. Scroll down by using “ DE ” on the thumbstick on the remote control.
3. Select the Setup menu by pressing “ ” on the thumbstick.
4. Scroll down to Clock by using “ DE ” on the thumbstick .
5. Move the highlight to the right with “ G ” on the thumbstick to Time Zone.
6. Select your time zone between Eastern and Hawaii by pressing “ G ” continuously.
7. Scroll down to Daylight Saving and press “ G ” to switch daylight saving on or off.
8. If you want to reset the clock, scroll down again to “Reset” and press “ ”.
The highlight will return to the previous level.
9. Press the Exit button on the remote control to return to TV viewing.