Zenith DTV1080 User Manual
Page 26
25
206-3675
3-4. Connecting to Antennas - Oval Dish (Satellite A, B)
Receiving Signals
1. Connect the “Antenna” to the “ANT IN” jack on the HD Satellite Receiver using a coaxial RF cable.
2. Connect the cable TV signal to the "CABLE IN" jack on the HD Satellite Receiver using a coaxial RF
cable.
3. Connect the “Jack 1” of the multi-switch to the “SATELLITE IN” jack on the HD satellite receiver using a
coaxial RF cable. (For proper dish installation, refer to the “Installer’s Guide” provided with your satellite
dish antenna.)
4. Connect the “Phone Wall Jack” to “PHONE JACK” on the HD satellite receiver using a phone cable.
DISPLAY
FORMAT
A/V
OUT2
A/V
CALIB/EZ-LINK
OUT1
Antenna
18V
4
3
2
1
Sat A ln
13V
LNB
Sat B
LNB
Sat A
Dish
18V 13V
Sat B ln
Phone wall jack
Cable TV
wall jack
Multi switch
PB
PR
NOTE
While you are subscribing to a DIRECTV
pro-
gramming package, you can still view over-the-
air and cable TV programs, if you make connec-
tions to the over-the-air and/or cable jacks.