Zenith DTV1080 - Manual (Page 84)

83
206-3675
8-13. Setting Default Signal Out
Out to TV -- Default Connection
Lets you choose whether the OUT TO TV jack is connected to either the CABLE
IN or ANT IN jack in standby mode.
To set the standby mode default signal source:
1. Press the Menu button on the Remote Control to display the on-screen menu.
2. Scroll down by using “ DE ” on the thumbstick on the remote control.
3. Select the Preference menu by pressing “ ” on the thumbstick.
4. Scroll down to Out to TV by using “ DE ” on the thumbstick.
5. Move the highlight to the right with “ G ” on the thumbstick.
6. Select Antenna or Cable and press “ ” to return to the previous level.
7. Press the Exit button on the remote control to return to TV viewing.