ZyXEL Communications NBG334SH - Manual (Page 117)

Chapter 9 Network Address Translation (NAT)
ZyXEL NBG-334SH User’s Guide
117
End Port Type a port number or the ending port number in a range of port numbers.
Trigger The trigger port is a port (or a range of ports) that causes (or triggers) the ZyXEL
Device to record the IP address of the LAN computer that sent the traffic to a
server on the WAN.
Start Port Type a port number or the starting port number in a range of port numbers.
End Port Type a port number or the ending port number in a range of port numbers.
Apply Click Apply to save your changes back to the ZyXEL Device.
Reset Click Reset to begin configuring this screen afresh.
Table 44 NAT Advanced
LABEL DESCRIPTION