ZyXEL Communications NBG334SH - Manual (Page 34)

Chapter 2 Wireless Tutorial
ZyXEL NBG-334SH User’s Guide
34
Figure 4 AP: Wireless LAN > General
2 Make sure the Enable Wireless LAN check box is selected.
3 Enter SSID_Example3 as the SSID and select a channel.
4 Set security mode to WPA-PSK and enter ThisismyWPA-PSKpre-sharedkey in the
Pre-Shared Key field. Click Apply.
5 Open the Status screen.Verify your wireless and wireless security settings under Device
Information and check if the WLAN connection is up under Interface Status.