ZyXEL Communications NBG334SH - Manual (Page 84)

Chapter 5 Wireless LAN
ZyXEL NBG-334SH User’s Guide
84
5.6 Wireless LAN Advanced Screen
Click Network > Wireless LAN > Advanced. The screen appears as shown.
Figure 48 Wireless LAN Advanced
The following table describes the labels in this screen.
Set This is the index number of the MAC address.
MAC
Address
Enter the MAC addresses of the wireless station that are allowed or denied access to
the ZyXEL Device in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Apply Click Apply to save your changes back to the ZyXEL Device.
Reset Click Reset to reload the previous configuration for this screen.
Table 28 MAC Address Filter
LABEL DESCRIPTION
Table 29 Wireless LAN Advanced
LABEL DESCRIPTION
Wireless Advanced Setup
RTS/CTS
Threshold
Data with its frame size larger than this value will perform the RTS (Request To
Send)/CTS (Clear To Send) handshake.
If the RTS/CTS value is greater than the Fragmentation Threshold value, then the
RTS/CTS handshake will never occur as data frames will be fragmented before they
reach RTS/CTS size.
Enter a value between 0 and 2432.
Fragmentation
Threshold
It is the maximum data fragment size that can be sent. Enter a value between 256
and 2432.
Output Power Set the output power of the ZyXEL Device in this field. If there is a high density of
APs within an area, decrease the output power of the ZyXEL Device to reduce
interference with other APs.