Product specifications, Appendix a product specifications, Product specifications (203) – ZyXEL Communications NBG334SH User Manual
Page 203
ZyXEL NBG-334SH User’s Guide
203
A
P P E N D I X
A
Product Specifications
The following tables summarize the ZyXEL Device’s hardware and firmware features.
Table 91 Hardware Features
Dimensions (W x D x H) 190 x 128 x 33 mm
Power Specification
12 V AC 1 A
Ethernet ports
Auto-negotiating:
This auto-negotiation feature allows the ZyXEL Device to detect the speed
of incoming transmissions and adjust appropriately without manual
intervention. It allows data transfer of either 10 Mbps or 100 Mbps in either
half-duplex or full-duplex mode depending on your Ethernet network.
Auto-crossover:
Use either crossover or straight-through Ethernet cables.
4-Port Switch
A combination of switch and router makes your ZyXEL Device a cost-
effective and viable network solution. You can add up to four computers to
the ZyXEL Device without the cost of a hub. Add more than four computers
to your LAN by using a hub.
Reset Button
The reset button is built into the rear panel. Use this button to restore the
ZyXEL Device to its factory default settings.
Antenna
The ZyXEL Device is equipped with a 2dBi fixed antenna to provide clear
radio transmission and reception on the wireless network.
Operation Temperature
0º C ~ 50º C
Storage Temperature
-20º C ~ 60º C
Operation Humidity
20% ~ 95% RH
Storage Humidity
10% ~ 90% RH
Distance between the
centers of the holes on
the device’s back.
125 mm
Screw size for wall-
mounting
M 3*10
Table 92 Firmware Features
FEATURE
DESCRIPTION
Default IP Address
192.168.1.1
Default Subnet Mask
255.255.255.0 (24 bits)
Default Password
1234
DHCP Pool
192.168.1.33 to 192.168.1.64
Device Management
Use the web configurator to easily configure the rich range of features on
the ZyXEL Device.